DC 75W HID Ballast solutions and products 

 -------------------------------------------------- ------------------------------ 

 Technical Specifications: 
 1 bulb models include: H1, H3, H4, H7, 9005,9006, etc. 
 (2) Color temperature: 4,300 K / 5,000 K / 6,000 K / 8,000 K / 10,000 K / 12,000 K. etc. 
 3 light colors: Huang Jinguang, sunlight, sky blue, light blue, dark blue, grass green. 
 4 life: 2500 hours Output power: 75W 
 5 lumens: 3200 lumens, is three times the halogen. 
 6, the beautiful and delicate: to provide a variety of 3000k-25000k color temperature, 3000K to Huang Jinguang, the effect is perfect, not astigmatism. 
 7, super protection: reverse polarity protection, over voltage protection, load protection, short circuit protection. 
 8, Universal: Product specifications, car-specific products for various types of vehicles, including all domestic cars, Western and Japanese cars. 
 9, easy installation: no changes to the original car parts, only the xenon lamp into the original lamp hole, fixed ballast, connect the power cable. 

 Performance: 
 1. Accept high voltage input :9.5-16 volts, applied to market all kinds of vehicles (including trucks, buses and cars). 
 2.SMR AMD electronic memory chips: the amount of the German ultra-large capacity that can parse and store the digital memory and a variety of high and low voltage current instability message, and to prevent interference from other electronics, the rectifier through the electromagnetic process, can conversion and stable voltage, to protect the function and life of HID. 
 3 pure aluminum: do not fall off the surface, sparse, not Ground insulation, will not affect the air-conditioning and interference with audio or start other electrical equipment. 
 4 Wide operating temperature range (-40 ℃ - +105 ℃): norm of the engine room can withstand high temperature, high temperature caused by lower failure probability. 
 5 Temperature Protection: Operating temperature does not increase with time with lighting, lighting 2-8 hours in line with international standards of 75 ℃ or less. 



 Protection: 
 1. Overpressure protection: When the power supply DC voltage exceeds 35V, the ballast automatically stop working, and to output not exceeding 75W, protect the ballast, HID bulbs to avoid damage. 
 2 low-voltage operation and protection: When the power supply DC voltage is 8V, the ballast can work; less than 7V, the ballast automatically stop working to avoid damage. 
 3 No-load protection: When the ballast bulb is not connected, in the empty state, the ballast automatically stop working to avoid high-voltage injuries staff. 
 4 short-circuit protection: When the ballast case of unforeseen circumstances, short-circuit state, the ballast automatically stop working to avoid damage. 
 5 Reverse Polarity Protection: When the ballast during installation, operator errors to the input power is negative reversed, the ballast automatically stop working. 

 6 Quick start: the standard voltage power supply input current is 12.8V, the current measured is not less than about 8.5A, so that the xenon bulb in the start then 1 second, luminous flux up to standard brightness of 20%; 4 seconds, luminous flux 80% up to standard brightness.