35-55W AC ballast solutions and products 
 -------------------------------------------------- ------------------------------ 
 A CPU microprocessor digital technology 

 Xenon lamp ballast testing at any time work status, and data back to the ballast, analysis, and then send the right commands to correct the error, therefore, xenon lights will be more reliable; Ballast xenon lamp output to the appropriate voltage, the xenon gas at both ends of the electrode to generate the appropriate current to stimulate the xenon gas, and continuously adjust the parameters of the xenon lamp to maintain normal working condition. 

 Two constant power 

 Excited xenon ballast xenon lamp output to stabilize the power to make the best of the xenon lamp, gave the state of play, so that any specification ballast xenon lamps are highly compatible. 

 Three safety and protection 

 In normal operation, the ballast to adjust the open circuit voltage and increasing the required input voltage xenon excitation. Xenon lamp and control the power needed to control the light of the purpose of adjusting the output current so that in between the highest and lowest current. 

 Four waterproof 

 Ballast design with fully sealed, with waterproof and dustproof performance. 

 Five good thermal conductivity. 

 At work, the ballast will produce internal heat, so cooling is important, the exchange ballast is caused by a high thermal conductivity of high-quality non-toxic materials completely sealed. Internal heat conduction through the metal guide to the ballast, the shell itself is also a high heat conductivity, so heat instantly evaporate out, the best cooling effect. 

 Six temperature 

 Exchange of ballast in the temperature of -40 degrees to 105 degrees to work, able to adapt to the harshest environments. 

 Seven modes 

 Exchange of ballast in the following three modes: 
 1) standby mode - when the input voltage falls below the minimum operating voltage or higher than the maximum working voltage, the ballast automatically switches to standby. When the input voltage is restored to the maximum and minimum voltage between the ballast immediately switch to normal operation. 
 2) working condition - when the ballast input voltage in the range of maximum and minimum allowed to enter the working state. Automatically adjust the open circuit voltage, and increase the input voltage required to ignite xenon gas. When activated xenon, ballast control the power to control the stability of xenon light levels. 
 3) safety off - when the ballast detects abnormalities, it switches this off and disconnect power. 

 Eight test 

 AC ballast reliability tests include: 
 ● Waterproof, dustproof 
 ● Vibration 
 ● High temperature 
 ● anti-instantaneous temperature 
 ● Anti-aging